echo 16 > /proc/sys/vm/nr_hugepages
./lsirec 0000:01:00.0 unbind
./lsirec 0000:01:00.0 halt
./lsirec 0000:01:00.0 readsbr sbr_backup.bin
python3 sbrtool.py parse sbr_backup.bin sbr.cfg
python3 sbrtool.py parse D2607haxsbr.bin sbr_example.cfg
sbr.cfg bearbeiten:
-> SASAddr -> z.b auf 0x500605bxxxxxxxxx (replace x with random adress)
example 0x500605bfd0023ed0
-> PCIPID = 0x0073 auf 0x0072 (check)
python3 sbrtool.py build sbr.cfg sbr_new.bin
./lsirec 0000:01:00.0 writesbr sbr_new.bin
./lsirec 0000:01:00.0 hostboot 2118it.bin
Device in MPT mode
Resetting adapter in HCB mode...
Trying unlock in MPT mode...
Device in MPT mode
IOC is RESET
Setting up HCB...
HCDW virtual: 0x7fca79e00000
HCDW physical: 0x439a00000
Loading firmware...
Loaded 722708 bytes
Booting IOC...
IOC is READY
IOC Host Boot successful.
lspci -vns 0000:01:00.0 -A linux-sysfs | head -n 2
lspci -vns 0000:01:00.0 -A intel-conf1 | head -n 2
./lsirec 0000:01:00.0 rescan
lsiutil -e
46. Upload FLASH section
5. Complete (all sections)
33. Erase non-volatile adapter storage
3. FLASH
8. Persistent manufacturing config pages
return!
2. Download firmware (update the FLASH)
2118it.bin (HBA)
oder 2118ir.bin (RAID)
4. Download/erase BIOS and/or FCode (update the FLASH)
BIOS = mptsas2.rom
FCode -> Return, leer lassen
UEFI = x64sas2.rom
lsiutil verlassen
./lsirec 0000:01:00.0 info
./lsirec 0000:01:00.0 reset (10-20s warten, info -> READY)
./lsirec 0000:01:00.0 rescan (10s warten)
lsiutil -e
18. Change SAS WWID
68. Show port state summary -> Kontrolle
open bar1 = reboot Danach SAS Addresse eintragen